Datasheet AD9203 (Analog Devices) - 6

AD9203 ABSOLUTE MAXIMUM RATINGS Table 2. With Parameter Respect to Min Max Unit
AVDD AVSS –0.3 +3.9 V DRVDD DRVSS –0.3 +3.9 V AVSS DRVSS –0.3 +0.3 V AVDD DRVDD –3.9 +3.9 V REFCOM AVSS –0.3 +0.3 V CLK AVSS –0.3 AVDD + 0.3 V Digital Outputs DRVSS –0.3 DRVDD + 0.3 V AINP AINN AVSS AVDD + 0.3 V Stresses above those listed under Absolute Maximum Ratings –0.3 may cause permanent damage to the device. This is a stress VREF AVSS –0.3 AVDD + 0.3 V rating only; functional operation of the device at these or any REFSENSE AVSS –0.3 AVDD + 0.3 V other conditions above those indicated in the operational REFTF, REFBF AVSS –0.3 AVDD + 0.3 V sections of this specification is not implied. Exposure to STBY AVSS –0.3 AVDD + 0.3 V absolute maximum ratings for extended periods may affect CLAMP AVSS –0.3 AVDD + 0.3 V device reliability. CLAMPIN AVSS –0.3 AVDD + 0.3 V PWRCON AVSS –0.3 AVDD + 0.3 V DFS AVSS –0.3 AVDD + 0.3 V 3-STATE AVSS –0.3 AVDD + 0.3 V Junction 150 °C Temperature Storage –65 +150 °C
THERMAL CHARACTERISTICS
Temperature 28-Lead TSSOP Lead 300 °C Temperature JA = 97.9°C/W (10 s) JC = 14.0°C/W
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on the human body and test equipment and can discharge without detection. Although this product features proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance degradation or loss of functionality. Rev. B | Page 5 of 28 Document Outline FEATURES GENERAL DESCRIPTION FUNCTIONAL BLOCK DIAGRAM PRODUCT HIGHLIGHTS SPECIFICATIONS ABSOLUTE MAXIMUM RATINGS THERMAL CHARACTERISTICS ESD CAUTION PIN CONFIGURATION AND FUNCTION DESCRIPTIONS TERMINOLOGY TYPICAL PERFORMANCE CHARACTERISTICS OPERATIONS THEORY OF OPERATION OPERATIONAL MODES INPUT AND REFERENCE OVERVIEW INTERNAL REFERENCE CONNECTION EXTERNAL REFERENCE OPERATION CLAMP OPERATION DRIVING THE ANALOG INPUT OP AMP SELECTION GUIDE DIFFERENTIAL MODE OF OPERATION POWER CONTROL INTERFACING TO 5 V SYSTEMS CLOCK INPUT AND CONSIDERATIONS DIGITAL INPUTS AND OUTPUTS APPLICATIONS DIRECT IF DOWN CONVERSION ULTRASOUND APPLICATIONS EVALUATION BOARD OUTLINE DIMENSIONS ORDERING GUIDE