Datasheet Intersil ISL95311UIU10Z-TK — Даташит

DATASHEET
ISL95311 FN8084
Rev 2.00
August 13, 2015 Digitally Controlled Potentiometer (XDCPв„ў),
Terminal Voltage 0V to 13.2V, 128 Taps I2C Interface
The Intersil ISL95311 is a digitally controlled potentiometer
(XDCP). The device consists of a resistor array, wiper
switches, a control section, and nonvolatile memory. The
wiper position is controlled by an I2C interface. Features The potentiometer is implemented by a resistor array
composed of 127 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The wiper of the
potentiometer has an associated volatile Wiper Counter
Register (WR) and a non-volatile Initial Value Register (IVR)
that can be directly written to and read by the user. The
contents of the WR controls the position of the wiper on the
resistor array through the switches. At power-up, the device
recalls the contents of the IVR to the corresponding WR. DCP terminal voltage, 0V to +13.2V The device can be used as a three-terminal potentiometer or
as a two-terminal variable resistor in a wide variety of
applications, including: LCD contrast control Non-volatile solid-state potentiometer I2C serial interface 128 wiper tap points -0.8% resolution
-Wiper position stored in nonvolatile memory and
recalled on power-up 127 resistive elements
-Temperature compensated …