Datasheet Intersil X9315TM — Даташит

DATASHEET
X9315 FN8179
Rev.2.00
December 21, 2009 Low Noise, Low Power, 32 Taps Digitally Controlled Potentiometer
(XDCPв„ў)
The Intersil X9315 is a digitally controlled potentiometer
(XDCP). The device consists of a resistor array, wiper
switches, a control section, and nonvolatile memory. The
wiper position is controlled by a 3-wire interface. Features The potentiometer is implemented by a resistor array
composed of 31 resistive elements and a wiper switching
network. Between each element and at either end are tap
points accessible to the wiper terminal. The position of the
wiper element is controlled by the CS, U/D, and INC inputs.
The position of the wiper can be stored in nonvolatile
memory and then be recalled upon a subsequent power-up
operation. 32 wiper tap points
-Wiper position stored in nonvolatile memory and
recalled on power-up The device can be used as a three-terminal potentiometer or
as a two-terminal variable resistor in a wide variety of
applications including: Control Solid-state potentiometer 3-wire serial interface 31 resistive elements
-Temperature compensated
-End to end resistance range В± 20%
-Terminal voltage, 0 to VCC Low power CMOS …